#include "main.h"
#include "public.h"
#include "key.h"
#include "sim_eeprom.h"
#include "tim3_pwm_output.h"
#include "adc_dma_multichanit.h"
#include <math.h>
#include "heater.h"
#include "fpc.h"
#include "ST7735S.h"
#include "pid.h"
#include "uart.h"
#include "timer.h"
#include "adc_anychannel_continuousscan_interrupt.h"
#include "spi_master_dma_interrupt.h"
#include "sim_eeprom.h"

int temp_pwm;
u8  T_temp_0 = 0;
char  T_temp_1 = 0;
float hot_1_C  = 0 ;   //  加热1s上升多少 度
float PWM_SCALE = 0;   //   pwm 比例；
float  down_up_rate = 0;   //   下段升温速率
double  down_per;           //   下段百分比
float  down_V  ;

u8  one_times_0 = 0;
u8  one_times_1 = 0;
double Q_J = 0;
u8  last_pwm = 0;
u8  down_rise_pwm = 0;
u8  up_down_flag = 0;

u8 	work_mode = 1; //0 待机;1开机 2加热;
u8  restart = 1 ;
u8 heat_start = 0;
u8 heat_stage = 0;
void SystemInit(void);
void GPIO_AIN_ALL(void)
{
	  GPIO_InitTypeDef GPIO_InitStruct;
    RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE);
    RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOB, ENABLE);
    RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOC, ENABLE);
    RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOD, ENABLE);

    GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin  = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 |
                                GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7 |
                                GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 |
                                GPIO_Pin_12 | GPIO_Pin_15;
    GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AIN;
    GPIO_Init(GPIOA, &GPIO_InitStruct);
	
	  GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin  = GPIO_Pin_All;
    GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AIN;
    GPIO_Init(GPIOC, &GPIO_InitStruct);
		GPIO_Init(GPIOB, &GPIO_InitStruct);
		GPIO_Init(GPIOD, &GPIO_InitStruct);

}
void PWR_GPIO_Configure(void)
{	
	PVCC_EN_OFF();
	Beep_OFF();
	IR_OFF();
	Charge_ON();
	LCD_OFF();
	
	GPIO_AIN_ALL();
	FPC_Init();
	
	GPIO_InitTypeDef GPIO_InitStruct;
		
	RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE);
	RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOB, ENABLE);
	RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOD, ENABLE);
	
	
	GPIO_StructInit(&GPIO_InitStruct);
	GPIO_InitStruct.GPIO_Pin   = GPIO_Pin_11 ;//PVCC
	GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz;
	GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
	GPIO_Init(GPIOA, &GPIO_InitStruct);
	
	GPIO_StructInit(&GPIO_InitStruct);
	GPIO_InitStruct.GPIO_Pin   = PVCC_EN_Pin ;//spi2 sda
	GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz;
	GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
	GPIO_Init(GPIOA, &GPIO_InitStruct);
		
	GPIO_StructInit(&GPIO_InitStruct);
	GPIO_InitStruct.GPIO_Pin   = ST7735_LED_Pin ;//LED
	GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz;
	GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
	GPIO_Init(ST7735_LED_GPIO_Port, &GPIO_InitStruct);
	
	GPIO_StructInit(&GPIO_InitStruct);
	GPIO_InitStruct.GPIO_Pin = GPIO_Pin_2;//HEAT
	GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz;
	GPIO_Init(GPIOA, &GPIO_InitStruct);
	
	GPIO_ResetBits(GPIOA,GPIO_Pin_2);
	GPIO_ResetBits(GPIOA,GPIO_Pin_11);
	PVCC_EN_OFF();
	Beep_OFF();
	IR_OFF();
	Charge_ON();
	LCD_OFF();

}

void PWR_EXTI_Configure(void)
{
	  EXTI_InitTypeDef EXTI_InitStruct;
		NVIC_InitTypeDef NVIC_InitStruct;
    //External interrupt Mode
    SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0);   //     按键
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line0;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
	
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource3);   //     5V充电
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line3;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
		
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource5);   //     触摸
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line5;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI0_1_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI2_3_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI4_15_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
		
}

void PWR_Pretreatment(void)
{
#ifdef	_debug_
		printf("lowpower in !\n");
#endif 
		ADC_VrefintCmd(DISABLE);
		ADC_Cmd(ADC1,DISABLE);
		DMA_Cmd(DMA1_Channel2, DISABLE);
    DMA_Cmd(DMA1_Channel3, DISABLE);
		DMA_Cmd(DMA1_Channel4, DISABLE);
    DMA_Cmd(DMA1_Channel5, DISABLE);
		SPI_Cmd(SPI1, DISABLE);
		SPI_Cmd(SPI2, DISABLE);
		TIM_Cmd(TIM2, DISABLE);
		UART_Cmd(UART1, DISABLE);      
	
		RCC_APB2PeriphClockCmd(RCC_APB2ENR_ADC1, ENABLE);
		RCC_AHBPeriphClockCmd(RCC_AHBENR_DMA1,DISABLE);
		RCC_APB2PeriphClockCmd(RCC_APB2ENR_UART1,DISABLE);
		RCC_APB2PeriphClockCmd(RCC_APB2ENR_SPI1,DISABLE);
		RCC_APB1PeriphClockCmd(RCC_APB1ENR_SPI2, DISABLE);
		RCC_APB1PeriphClockCmd(RCC_APB1ENR_TIM2, DISABLE);
		
    PWR_GPIO_Configure();
    PWR_EXTI_Configure();
		
}

void PWR_Reinitialize(void)
{
		SystemInit();
		CONSOLE_Init(115200);
		TimerInit();
		g_work.m_work_flag._Uart_match = 0;
		FPC_Init();//包括FPC 充电 蜂鸣器 触摸引脚初始化
		SPI1_Configure();//16M flash
		SPI2_Configure();//LCD spi
		SPI1_FLASH_ReadDeviceID();
		SPI1_FLASH_ReadJEDEC_ID();
		ST7735_Init();
		Heater_Init();
		ADC_Configure();
		ADC_SoftwareStartConvCmd(ADC1, ENABLE);
		OFF_delay_time = 5000;
		FPC_Scan();
}
void work_new(void)
{
	if(work_mode == 0 )//低功耗
	{
		restart = 1;
		logo1_flag = 0;
		logo2_flag = 0;
		logo3_flag = 0;
		logo4_flag = 0;
		logo5_flag = 0;
		heat_stage = 0;
		PWR_Pretreatment();//准备进入低功耗前
		/* Deep Stop Mode */
		RCC_APB1PeriphClockCmd(RCC_APB1ENR_PWR, ENABLE);
		PWR_EnterSTOPMode(PWR_Regulator_LowPower, PWR_STOPEntry_WFI);
		PWR_Reinitialize();
	}
	else if(work_mode == 1)//开机+电量显示
	{
		logo3_flag = 0;
		logo4_flag = 0;
		logo5_flag = 0;
		heat_stage = 0;
		temp_control_new(0,0);
		if(restart == 1)
		{
			logo2_flag = 0;
			animation_start();//播放开机动画
		}
		else 
		{
			logo1_flag = 0;
			animation_show_v();
		}
	}
	else if(work_mode == 2)//加热
	{
		logo1_flag = 0;
		logo2_flag = 0;
		heat_control();
		if(heat_stage == 1)//升温状态
		{
			animation_temp_on();
		}
		else if(heat_stage == 2)//恒温抽吸状态
		{
			animation_smoking();
		}
		else if (heat_stage ==3)//加热完成状态
		{
			animation_heat_over();
		}
	}
}