#include "fpc.h"
#include <stdio.h>
#include "public.h"
#include "ST7735S.h"
#include "sim_eeprom.h"
#include "adc_anychannel_continuousscan_interrupt.h"

void FPC_Init(void)
{
		EXTI_InitTypeDef EXTI_InitStruct;
		GPIO_InitTypeDef GPIO_InitStruct;
		NVIC_InitTypeDef NVIC_InitStruct;
	
		RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOB, ENABLE);
		RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE);
	
		GPIO_StructInit(&GPIO_InitStruct);
		GPIO_InitStruct.GPIO_Pin   = FPC_KEY_GPIO_Pin ;//KEY
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
		GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
		GPIO_Init(FPC_KEY_GPIO_Port, &GPIO_InitStruct);

    GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = FPC_IR_TX_GPIO_Pin ;//IR_TX
    GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
    GPIO_Init(FPC_IR_TX_GPIO_Port, &GPIO_InitStruct);
	   
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = FPC_IR_RX_GPIO_Pin ;//IR_RX
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
    GPIO_Init(FPC_IR_RX_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = FPC_Touch_GPIO_Pin ;//TOUCH
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
    GPIO_Init(FPC_Touch_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = CHARGE_5V_GPIO_Pin ;//5v_test
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
    GPIO_Init(CHARGE_5V_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = STB_GPIO_Pin ;//STANBY
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_IPD;
    GPIO_Init(STB_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = CHARGE_CON_GPIO_Pin ;//charge_con
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
    GPIO_Init(CHARGE_CON_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = BEEP_GPIO_Pin ;//beep
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
    GPIO_Init(BEEP_GPIO_Port, &GPIO_InitStruct);
		
		SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOB, EXTI_PinSource0);//KEY
		SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOB, EXTI_PinSource5);//TOUCH
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource3);//5V充电
	
		EXTI_StructInit(&EXTI_InitStruct);
		EXTI_InitStruct.EXTI_Line    = EXTI_Line0;
		EXTI_InitStruct.EXTI_Mode    = EXTI_Mode_Interrupt;
		EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
		EXTI_InitStruct.EXTI_LineCmd = ENABLE;
		EXTI_Init(&EXTI_InitStruct);
		
		EXTI_StructInit(&EXTI_InitStruct);
		EXTI_InitStruct.EXTI_Line    = EXTI_Line5;
		EXTI_InitStruct.EXTI_Mode    = EXTI_Mode_Interrupt;
		EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising;
		EXTI_InitStruct.EXTI_LineCmd = ENABLE;
		EXTI_Init(&EXTI_InitStruct);
		
		EXTI_StructInit(&EXTI_InitStruct);
		EXTI_InitStruct.EXTI_Line    = EXTI_Line3;
		EXTI_InitStruct.EXTI_Mode    = EXTI_Mode_Interrupt;
		EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
		EXTI_InitStruct.EXTI_LineCmd = ENABLE;
		EXTI_Init(&EXTI_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI0_1_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI2_3_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI4_15_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
}

static void EXTI_Config(void)
{
    EXTI_InitTypeDef EXTI_InitStruct;
    EXTI_StructInit(&EXTI_InitStruct);
    //External interrupt Mode
    SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0);   //     按键
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line0;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
	
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource3);   //     5V充电
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line3;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
		
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource5);   //     触摸
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line5;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
		
		
}

void EXTI0_1_IRQHandler(void)
{
    /* K1 */
    if (RESET != EXTI_GetITStatus(EXTI_Line0))
    {
				OFF_delay_time = 5000;
        EXTI_ClearITPendingBit(EXTI_Line0);
    }
}

void EXTI2_3_IRQHandler(void)
{
    /* TOUCH */
    if (RESET != EXTI_GetITStatus(EXTI_Line3))
    {
				OFF_delay_time = 5000;
        EXTI_ClearITPendingBit(EXTI_Line3);
    }
}


void EXTI4_15_IRQHandler(void)
{
    /* TOUCH */
    if (RESET != EXTI_GetITStatus(EXTI_Line5))
    {
				OFF_delay_time = 5000;
        EXTI_ClearITPendingBit(EXTI_Line5);
    }
}

void FPC_Scan(void)
{
	static bool key_down_flag = 0;
	u8  v_buffer;
	v_buffer = V_Condition_new();
	if(bat_v_delay >0)
	{
		if(v_buffer>=4)
		{
			v_buffer -= 4;//简易加热后电压补偿
		}
	}
	g_work.m_conditon.m_conditon.V_conditon = v_buffer;
#ifdef	IR_ENABLE
	if(Key_READ == 0)//开盖
	{
			OFF_delay_time = 5000;
			if(GPIO_ReadOutputDataBit(FPC_IR_TX_GPIO_Port,FPC_IR_TX_GPIO_Pin) == 1)//如果没开，打开红外管
			{
				IR_ON();
				IR_delay = 10;//红外发送到接收时延10ms
			}
			if(IR_READ == 1 && IR_delay == 0 && g_work.m_conditon.m_conditon.V_conditon <15)//插入烟
			{
				work_mode = 2;//加热状态
			}
			else
			{
				work_mode = 1;
			}
	}
	else
	{
		if(OFF_delay_time>0)
		{
			work_mode = 1;
		}
		else 
		{
			work_mode = 0 ;
		}
	}
#else 
	if(TOUCH_READ == 1)//长按不进睡眠
	{
		OFF_delay_time = 5000;
	}
	
	if(Key_READ == 0)//按键防抖时延50ms
	{
		OFF_delay_time = 5000;
		if(key_down_flag == 0)
		{
			key_delay = 50;
			key_down_flag = 1;
		}
	}
	else
	{
		if(key_down_flag == 1)
		{
			key_down_flag = 0;
		}
	}
	
	if( key_down_flag == 1&& key_delay == 0 && g_work.m_conditon.m_conditon.V_conditon <15 )//插入烟支，开始加热
	{
			work_mode = 2;
	}
	else
	{
		if(OFF_delay_time>0)
		{
			work_mode = 1;
		}
		else 
		{
			work_mode = 0 ;
		}
	}
#endif
		
	if(CHARGE5V_READ == 1)//有5V接入，需要根据工作状态判断是否充电
	{
		OFF_delay_time = 5000;//只要插入充电线就不熄屏，保持开机
		if(work_mode==2)//加热流程中
		{
			is_charging = 0;//加热不允许充电
			if(GPIO_ReadOutputDataBit(CHARGE_CON_GPIO_Port,CHARGE_CON_GPIO_Pin)==0)
			{
				Charge_OFF();
			}
		}
		else
		{
			is_charging = 1;//加热不允许充电
			if(GPIO_ReadOutputDataBit(CHARGE_CON_GPIO_Port,CHARGE_CON_GPIO_Pin)==1)
			{
				Charge_ON();
			}
		}
	}
	else
	{
			is_charging = 0;
	}

}