TJ-WW03-H03/APP_smoke_N_V1.3/HARDWARE/FPC/fpc.c

#include "fpc.h"
#include <stdio.h>
#include "public.h"
#include "ST7735S.h"
#include "sim_eeprom.h"
#include "adc_anychannel_continuousscan_interrupt.h"

void FPC_Init(void)
{
		EXTI_InitTypeDef EXTI_InitStruct;
		GPIO_InitTypeDef GPIO_InitStruct;
		NVIC_InitTypeDef NVIC_InitStruct;
	
		RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOB, ENABLE);
		RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE);
	
		GPIO_StructInit(&GPIO_InitStruct);
		GPIO_InitStruct.GPIO_Pin   = FPC_KEY_GPIO_Pin ;//KEY
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
		GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
		GPIO_Init(FPC_KEY_GPIO_Port, &GPIO_InitStruct);

    GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = FPC_IR_TX_GPIO_Pin ;//IR_TX
    GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
    GPIO_Init(FPC_IR_TX_GPIO_Port, &GPIO_InitStruct);
	   
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = FPC_IR_RX_GPIO_Pin ;//IR_RX
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
    GPIO_Init(FPC_IR_RX_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = FPC_Touch_GPIO_Pin ;//TOUCH
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
    GPIO_Init(FPC_Touch_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = CHARGE_5V_GPIO_Pin ;//5v_test
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_FLOATING;
    GPIO_Init(CHARGE_5V_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = STB_GPIO_Pin ;//STANBY
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_IPD;
    GPIO_Init(STB_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = CHARGE_CON_GPIO_Pin ;//charge_con
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
    GPIO_Init(CHARGE_CON_GPIO_Port, &GPIO_InitStruct);
		
		GPIO_StructInit(&GPIO_InitStruct);
    GPIO_InitStruct.GPIO_Pin   = BEEP_GPIO_Pin ;//beep
		GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_Out_PP;
    GPIO_Init(BEEP_GPIO_Port, &GPIO_InitStruct);
		
		SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOB, EXTI_PinSource0);//KEY
		SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOB, EXTI_PinSource5);//TOUCH
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource3);//5V<35><56><EFBFBD><EFBFBD>
	
		EXTI_StructInit(&EXTI_InitStruct);
		EXTI_InitStruct.EXTI_Line    = EXTI_Line0;
		EXTI_InitStruct.EXTI_Mode    = EXTI_Mode_Interrupt;
		EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
		EXTI_InitStruct.EXTI_LineCmd = ENABLE;
		EXTI_Init(&EXTI_InitStruct);
		
		EXTI_StructInit(&EXTI_InitStruct);
		EXTI_InitStruct.EXTI_Line    = EXTI_Line5;
		EXTI_InitStruct.EXTI_Mode    = EXTI_Mode_Interrupt;
		EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising;
		EXTI_InitStruct.EXTI_LineCmd = ENABLE;
		EXTI_Init(&EXTI_InitStruct);
		
		EXTI_StructInit(&EXTI_InitStruct);
		EXTI_InitStruct.EXTI_Line    = EXTI_Line3;
		EXTI_InitStruct.EXTI_Mode    = EXTI_Mode_Interrupt;
		EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
		EXTI_InitStruct.EXTI_LineCmd = ENABLE;
		EXTI_Init(&EXTI_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI0_1_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI2_3_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
		
		NVIC_InitStruct.NVIC_IRQChannel = EXTI4_15_IRQn;
		NVIC_InitStruct.NVIC_IRQChannelPriority = 0x01;
		NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
		NVIC_Init(&NVIC_InitStruct);
}

static void EXTI_Config(void)
{
    EXTI_InitTypeDef EXTI_InitStruct;
    EXTI_StructInit(&EXTI_InitStruct);
    //External interrupt Mode
    SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0);   //     <20><><EFBFBD><EFBFBD>
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line0;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
	
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource3);   //     5V<35><56><EFBFBD><EFBFBD>
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line3;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
		
		SYSCFG_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource5);   //     <20><><EFBFBD><EFBFBD>
    //Interrupt threads where pins are located
    EXTI_InitStruct.EXTI_Line = EXTI_Line5;
    EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
    //rising trigger
    EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
    EXTI_InitStruct.EXTI_LineCmd = ENABLE;
    EXTI_Init(&EXTI_InitStruct);
		
		
}

void EXTI0_1_IRQHandler(void)
{
    /* K1 */
    if (RESET != EXTI_GetITStatus(EXTI_Line0))
    {
				OFF_delay_time = 5000;
        EXTI_ClearITPendingBit(EXTI_Line0);
    }
}

void EXTI2_3_IRQHandler(void)
{
    /* TOUCH */
    if (RESET != EXTI_GetITStatus(EXTI_Line3))
    {
				OFF_delay_time = 5000;
        EXTI_ClearITPendingBit(EXTI_Line3);
    }
}


void EXTI4_15_IRQHandler(void)
{
    /* TOUCH */
    if (RESET != EXTI_GetITStatus(EXTI_Line5))
    {
				OFF_delay_time = 5000;
        EXTI_ClearITPendingBit(EXTI_Line5);
    }
}

void FPC_Scan(void)
{
	static bool key_down_flag = 0;
	u8  v_buffer;
	v_buffer = V_Condition_new();
	if(bat_v_delay >0)
	{
		if(v_buffer>=4)
		{
			v_buffer -= 4;//<2F><><EFBFBD>׼<EFBFBD><D7BC>Ⱥ<EFBFBD><C8BA><EFBFBD>ѹ<EFBFBD><D1B9><EFBFBD><EFBFBD>
		}
	}
	g_work.m_conditon.m_conditon.V_conditon = v_buffer;
#ifdef	IR_ENABLE
	if(Key_READ == 0)//<2F><><EFBFBD><EFBFBD>
	{
			OFF_delay_time = 5000;
			if(GPIO_ReadOutputDataBit(FPC_IR_TX_GPIO_Port,FPC_IR_TX_GPIO_Pin) == 1)//<2F><><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD><EFBFBD>򿪺<EFBFBD><F2BFAABA><EFBFBD><EFBFBD><EFBFBD>
			{
				IR_ON();
				IR_delay = 10;//<2F><><EFBFBD>ⷢ<EFBFBD>͵<EFBFBD><CDB5><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>10ms
			}
			if(IR_READ == 1 && IR_delay == 0 && g_work.m_conditon.m_conditon.V_conditon <15)//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
			{
				work_mode = 2;//<2F><><EFBFBD><EFBFBD>״̬
			}
			else
			{
				work_mode = 1;
			}
	}
	else
	{
		if(OFF_delay_time>0)
		{
			work_mode = 1;
		}
		else 
		{
			work_mode = 0 ;
		}
	}
#else 
	if(TOUCH_READ == 1)//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>˯<EFBFBD><CBAF>
	{
		OFF_delay_time = 5000;
	}
	
	if(Key_READ == 0)//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>50ms
	{
		OFF_delay_time = 5000;
		if(key_down_flag == 0)
		{
			key_delay = 50;
			key_down_flag = 1;
		}
	}
	else
	{
		if(key_down_flag == 1)
		{
			key_down_flag = 0;
		}
	}
	
	if( key_down_flag == 1&& key_delay == 0 && g_work.m_conditon.m_conditon.V_conditon <15 )//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>֧<EFBFBD><D6A7><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD>
	{
			work_mode = 2;
	}
	else
	{
		if(OFF_delay_time>0)
		{
			work_mode = 1;
		}
		else 
		{
			work_mode = 0 ;
		}
	}
#endif
		
	if(CHARGE5V_READ == 1)//<2F><>5V<35><56><EFBFBD>룬<EFBFBD><EBA3AC>Ҫ<EFBFBD><D2AA><EFBFBD>ݹ<EFBFBD><DDB9><EFBFBD>״̬<D7B4>ж<EFBFBD><D0B6>Ƿ<EFBFBD><C7B7><EFBFBD><EFBFBD><EFBFBD>
	{
		OFF_delay_time = 5000;//ֻҪ<D6BB><D2AA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>߾Ͳ<DFBE>Ϩ<EFBFBD><CFA8><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ֿ<EFBFBD><D6BF><EFBFBD>
		if(work_mode==2)//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
		{
			is_charging = 0;//<2F><><EFBFBD>Ȳ<EFBFBD><C8B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
			if(GPIO_ReadOutputDataBit(CHARGE_CON_GPIO_Port,CHARGE_CON_GPIO_Pin)==0)
			{
				Charge_OFF();
			}
		}
		else
		{
			is_charging = 1;//<2F><><EFBFBD>Ȳ<EFBFBD><C8B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
			if(GPIO_ReadOutputDataBit(CHARGE_CON_GPIO_Port,CHARGE_CON_GPIO_Pin)==1)
			{
				Charge_ON();
			}
		}
	}
	else
	{
			is_charging = 0;
	}

}