560 lines
16 KiB
C
560 lines
16 KiB
C
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @file adc_dma_multichanit.c
|
|||
|
|
/// @author AE TEAM
|
|||
|
|
/// @brief Multichannel sampling using DMA.The final sampling results
|
|||
|
|
/// (ADCVolatge) are viewed through simulation.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @attention
|
|||
|
|
///
|
|||
|
|
/// THE EXISTING FIRMWARE IS ONLY FOR REFERENCE, WHICH IS DESIGNED TO PROVIDE
|
|||
|
|
/// CUSTOMERS WITH CODING INFORMATION ABOUT THEIR PRODUCTS SO THEY CAN SAVE
|
|||
|
|
/// TIME. THEREFORE, MINDMOTION SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
|
|||
|
|
/// CONSEQUENTIAL DAMAGES ABOUT ANY CLAIMS ARISING OUT OF THE CONTENT OF SUCH
|
|||
|
|
/// HARDWARE AND/OR THE USE OF THE CODING INFORMATION CONTAINED HEREIN IN
|
|||
|
|
/// CONNECTION WITH PRODUCTS MADE BY CUSTOMERS.
|
|||
|
|
///
|
|||
|
|
/// <H2><CENTER>© COPYRIGHT MINDMOTION </CENTER></H2>
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
// Define to prevent recursive inclusion
|
|||
|
|
#define _ADC_DMA_MultiChanIT_C_
|
|||
|
|
|
|||
|
|
// Files includes
|
|||
|
|
#include "adc_dma_multichanit.h"
|
|||
|
|
#include "public.h"
|
|||
|
|
#include "math.h"
|
|||
|
|
#include "sim_eeprom.h"
|
|||
|
|
#include "key.h"
|
|||
|
|
#include "pid.h"
|
|||
|
|
#include "tim3_pwm_output.h"
|
|||
|
|
#include "fpc.h"
|
|||
|
|
//#include "delay.h"
|
|||
|
|
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @addtogroup MM32_Hardware_Abstract_Layer
|
|||
|
|
/// @{
|
|||
|
|
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @addtogroup ADC_DMA_MULTICHANIT
|
|||
|
|
/// @{
|
|||
|
|
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @addtogroup ADC_Exported_Functions
|
|||
|
|
/// @{
|
|||
|
|
|
|||
|
|
vu32 adc_value = 0;
|
|||
|
|
vu8 ADCflag = 0;
|
|||
|
|
vu16 varADCavarage[AVERAGELEN][ADCSCANNUM];
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief Configure sampling GPIO with single conversion mode for ADC1
|
|||
|
|
/// @note Note the corresponding channel selection.
|
|||
|
|
/// @param ADC_Channel_x: The sampling channel
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
void ADCConfig(ADCCHANNEL_TypeDef adc_channel)
|
|||
|
|
{
|
|||
|
|
if( ADC_Channel_0 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_0);
|
|||
|
|
ADCSingleChannelInit(ADC_Channel_0);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_1 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_1);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_2 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_2);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_3 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_3);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_4 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_4);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_5 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_5);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_6 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_6);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_7 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOA, GPIO_Pin_7);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_8 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOB, GPIO_Pin_0);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_9 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOB, GPIO_Pin_1);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_11 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOB, GPIO_Pin_4);
|
|||
|
|
}
|
|||
|
|
else if( ADC_Channel_12 == adc_channel ) {
|
|||
|
|
GPIO_PinConfigAnalog(GPIOB, GPIO_Pin_7);
|
|||
|
|
}
|
|||
|
|
ADCSingleChannelInit(adc_channel);
|
|||
|
|
}
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief Configure the ADC1 single conversion mode to correspond to the PIN
|
|||
|
|
/// @note It must be careful of the Chip Version.
|
|||
|
|
/// @param GPIOn: The sampling GPIOn corresponds to the port
|
|||
|
|
/// @param gpio_pin: The sampling gpio_pin corresponds to the pin.
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
void GPIO_PinConfigAnalog(GPIO_TypeDef* GPIOn, u16 gpio_pin)
|
|||
|
|
{
|
|||
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|||
|
|
if(GPIOn == GPIOA) {
|
|||
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE);
|
|||
|
|
}
|
|||
|
|
if(GPIOn == GPIOB) {
|
|||
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOB, ENABLE);
|
|||
|
|
}
|
|||
|
|
if(GPIOn == GPIOC) {
|
|||
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOC, ENABLE);
|
|||
|
|
}
|
|||
|
|
if(GPIOn == GPIOD) {
|
|||
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOD, ENABLE);
|
|||
|
|
}
|
|||
|
|
GPIO_StructInit(&GPIO_InitStruct);
|
|||
|
|
GPIO_InitStruct.GPIO_Pin = gpio_pin;
|
|||
|
|
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
|
|||
|
|
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AIN;
|
|||
|
|
GPIO_Init(GPIOn, &GPIO_InitStruct);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief Configure ADC1 single conversion mode<64><65>external interrupt source
|
|||
|
|
/// interrupt priority
|
|||
|
|
/// @note Configure parameters according to requirements.
|
|||
|
|
/// @param ADC_Channel_x: The sampling channel
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
void ADCInit(void)
|
|||
|
|
{
|
|||
|
|
ADC_InitTypeDef ADC_InitStruct;
|
|||
|
|
ADC_StructInit(&ADC_InitStruct);
|
|||
|
|
|
|||
|
|
//Initialize PA1 to analog input mode
|
|||
|
|
//Enable ADC clock
|
|||
|
|
RCC_APB2PeriphClockCmd(RCC_APB2ENR_ADC1, ENABLE);
|
|||
|
|
ADC_InitStruct.ADC_Resolution = ADC_Resolution_12b;
|
|||
|
|
//ADC prescale factor
|
|||
|
|
ADC_InitStruct.ADC_PRESCARE = ADC_PCLK2_PRESCARE_8;
|
|||
|
|
//Set ADC mode to continuous conversion mode
|
|||
|
|
ADC_InitStruct.ADC_Mode = ADC_CR_SCAN;//ADC_Mode_Continue;
|
|||
|
|
//AD data right-justified
|
|||
|
|
ADC_InitStruct.ADC_DataAlign = ADC_DataAlign_Right;
|
|||
|
|
ADC_InitStruct.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
|
|||
|
|
ADC_Init(ADC1, &ADC_InitStruct);
|
|||
|
|
|
|||
|
|
//Enable ADCDMA
|
|||
|
|
ADC_DMACmd(ADC1, ENABLE);
|
|||
|
|
//Enable AD conversion
|
|||
|
|
ADC_Cmd(ADC1, ENABLE);
|
|||
|
|
}
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief Configure ADC1 single conversion mode<64><65>external interrupt source
|
|||
|
|
/// interrupt priority
|
|||
|
|
/// @note Configure parameters according to requirements.
|
|||
|
|
/// @param ADC_Channel_x: The sampling channel
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
void ADCSingleChannelInit(ADCCHANNEL_TypeDef ADC_Channel_x)
|
|||
|
|
{
|
|||
|
|
//Enable the channel
|
|||
|
|
ADC_RegularChannelConfig(ADC1, ADC_Channel_x, 0, ADC_Samctl_240_5);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief DMA and interrupt priority configuration
|
|||
|
|
/// @note Configure parameters according to requirements.
|
|||
|
|
/// @param None.
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
void DMAInit(void)
|
|||
|
|
{
|
|||
|
|
DMA_InitTypeDef DMA_InitStruct;
|
|||
|
|
NVIC_InitTypeDef NVIC_InitStruct;
|
|||
|
|
|
|||
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_DMA1, ENABLE);
|
|||
|
|
DMA_DeInit(DMA1_Channel1);
|
|||
|
|
DMA_StructInit(&DMA_InitStruct);
|
|||
|
|
|
|||
|
|
DMA_InitStruct.DMA_PeripheralBaseAddr = (u32) & (ADC1->DR);
|
|||
|
|
DMA_InitStruct.DMA_MemoryBaseAddr = (u32)&ADCValue;
|
|||
|
|
DMA_InitStruct.DMA_DIR = DMA_DIR_PeripheralSRC;
|
|||
|
|
DMA_InitStruct.DMA_BufferSize = ADCSCANNUM;
|
|||
|
|
DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
|||
|
|
DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|||
|
|
DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
|
|||
|
|
DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
|
|||
|
|
DMA_InitStruct.DMA_Mode = DMA_Mode_Circular;
|
|||
|
|
DMA_InitStruct.DMA_Priority = DMA_Priority_High;
|
|||
|
|
DMA_InitStruct.DMA_M2M = DMA_M2M_Disable;
|
|||
|
|
DMA_InitStruct.DMA_Auto_reload = DMA_Auto_Reload_Disable;
|
|||
|
|
DMA_Init(DMA1_Channel1, &DMA_InitStruct);
|
|||
|
|
DMA_Cmd(DMA1_Channel1, ENABLE);
|
|||
|
|
|
|||
|
|
//DMA interrupt initialization
|
|||
|
|
DMA_ITConfig(DMA1_Channel1, DMA_IT_TC, ENABLE);
|
|||
|
|
NVIC_InitStruct.NVIC_IRQChannel = DMA1_Channel1_IRQn;
|
|||
|
|
NVIC_InitStruct.NVIC_IRQChannelPriority = 0x02;
|
|||
|
|
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
|
|||
|
|
NVIC_Init(&NVIC_InitStruct);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief Process values read from DMA,ADC second-order filter,
|
|||
|
|
/// when the filter is completed erection filter end marker.
|
|||
|
|
/// @note None.
|
|||
|
|
/// @param None.
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
//u32 lastAD_value[ADCSCANNUM ] = {0,0,0};
|
|||
|
|
//u8 last_count[ADCSCANNUM] = {0,0,0};
|
|||
|
|
u8 onetimes = 0;
|
|||
|
|
|
|||
|
|
//修改为中值滤波
|
|||
|
|
void ADCFilter(void)
|
|||
|
|
{
|
|||
|
|
u16 chan;
|
|||
|
|
u16 cntFilter;
|
|||
|
|
u32 lADCFilterValue[ADCSCANNUM] = {0,0,0,0};
|
|||
|
|
|
|||
|
|
for(chan = 0; chan < ADCSCANNUM; chan++)
|
|||
|
|
{
|
|||
|
|
for(cntFilter = 0; cntFilter < AVERAGELEN; cntFilter++)
|
|||
|
|
{
|
|||
|
|
lADCFilterValue[chan] += varADCavarage[cntFilter][chan];
|
|||
|
|
}
|
|||
|
|
ADCFilterValue[chan] = lADCFilterValue[chan] / AVERAGELEN;
|
|||
|
|
//printf("\nADCFilterValue[chan]:%d\n",ADCFilterValue[chan]);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief Transform the optimized data to get the final result.
|
|||
|
|
/// @note None.
|
|||
|
|
/// @param None.
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
|
|||
|
|
float R_1 = 0;
|
|||
|
|
float R_2 = 0 ;
|
|||
|
|
|
|||
|
|
float current_temp_1 = 0;
|
|||
|
|
u32 current_temp_2 = 0;
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
u16 count = 0;
|
|||
|
|
void Get_ADCVolatge(void)
|
|||
|
|
{
|
|||
|
|
u16 chan;
|
|||
|
|
|
|||
|
|
|
|||
|
|
float sub_1 = 0;
|
|||
|
|
float sub_2 = 0;
|
|||
|
|
|
|||
|
|
float T_1 = 0;
|
|||
|
|
float T_2 = 0;
|
|||
|
|
|
|||
|
|
WWDG_SetCounter(0x7e);
|
|||
|
|
for(chan = 0; chan < ADCSCANNUM; chan++)
|
|||
|
|
{
|
|||
|
|
ADCVolatge[chan] = ((float)ADCFilterValue[chan] / 4095) * REFVOLATGE;
|
|||
|
|
//printf("\nADCVolatge[%d]:%f\n",chan, ADCVolatge[chan]);
|
|||
|
|
}
|
|||
|
|
//printf("\nV:%f\n", ADCVolatge[2] * 2);
|
|||
|
|
sub_1 = (ADCVolatge[1] / 50 )/ 0.01f; //电流 电压/0.003欧姆电阻
|
|||
|
|
|
|||
|
|
// printf("\nADCVolatge[1]:%f\n",ADCVolatge[1]);
|
|||
|
|
//printf("\nsub_1:%f\n", sub_1); //2024年5月8日11:13:20 0.3 误差补偿
|
|||
|
|
R_1 = (ADCVolatge[2] * 2) / sub_1 - 0.01 + 0.3;//ADCVolatge[1] / sub_1;
|
|||
|
|
g_work.r_value = R_1 * 1000;
|
|||
|
|
//printf("\nR_1:%f\n", R_1);
|
|||
|
|
//printf("\ng_work.m_set_other_hot.TCR_vlaue:%d\n",g_work.m_set_other_hot.TCR_vlaue);
|
|||
|
|
|
|||
|
|
if( g_work.m_work_flag._nor_stand_flag == 0 )
|
|||
|
|
{
|
|||
|
|
T_1 = ( R_1 - (float)g_work.m_set_other_hot.normal_R_Value/ 1000.0f) / ( (float)g_work.m_set_other_hot.TCR_vlaue / 1000000.0f *g_work.m_set_other_hot.normal_R_Value/1000.0f );
|
|||
|
|
current_temp_1 = (g_work.m_set_other_hot.normal_T_Value + T_1) ;
|
|||
|
|
g_work.temp_1 = current_temp_1 ;
|
|||
|
|
|
|||
|
|
// printf("\ng_work.m_set_other_hot.TCR_vlaue:%d\n",g_work.m_set_other_hot.TCR_vlaue);
|
|||
|
|
//printf("\ng_work.temp_1:%f\n",g_work.temp_1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
else // 开始低温标定
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
if( g_work.work_conditon == STANDY ) // 待机模式
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
if ( g_work.m_work_flag._nor_stand_flag == 1 )
|
|||
|
|
{
|
|||
|
|
if(g_work.temp_delay > 1500)
|
|||
|
|
{
|
|||
|
|
if( R_1 > 0.7 && R_1 < 0.9 )
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
g_work.m_set_other_hot.normal_R_Value = R_1 * 1000;
|
|||
|
|
send_TCR(g_work.m_set_other_hot.normal_R_Value); // 开始标定标定标志
|
|||
|
|
flash_wite();
|
|||
|
|
}
|
|||
|
|
else
|
|||
|
|
{
|
|||
|
|
send_ack(2); // 标定错误；
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if( g_work.m_work_flag._high_stand_flag == 1) //高温标定
|
|||
|
|
{
|
|||
|
|
flash_wite();
|
|||
|
|
g_work.m_work_flag._high_stand_flag = 0;
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
if(g_work.check_info == 1)
|
|||
|
|
{
|
|||
|
|
send_TCR_value(g_work.m_set_other_hot.TCR_vlaue,g_work.m_set_other_hot.normal_R_Value,g_work.m_set_other_hot.normal_T_Value);
|
|||
|
|
g_work.check_info = 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
pid.curr = g_work.temp_1;
|
|||
|
|
|
|||
|
|
if(g_work.work_conditon == STANDY)
|
|||
|
|
{
|
|||
|
|
//由于误差问题，需要校正电压。
|
|||
|
|
g_work.V_real_Value = (ADCVolatge[2]) * 100 * 2;
|
|||
|
|
}
|
|||
|
|
else
|
|||
|
|
{
|
|||
|
|
g_work.V_real_Value = (ADCVolatge[2]) * 100 * 2;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
//printf("\ng_work.V_real_Value:%d\n",g_work.V_real_Value);
|
|||
|
|
if( g_work.m_time._work_time > 500 )
|
|||
|
|
{
|
|||
|
|
g_work.m_time._work_time = 0;
|
|||
|
|
// 电池温度 判断 以及预警
|
|||
|
|
if( ADCVolatge[0] < 0.901 ) // 60 22k
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
|
|||
|
|
if( ADCVolatge[0] < 0.454 ) // 80 10k
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
if( V_5_V == 0 )
|
|||
|
|
{
|
|||
|
|
if( g_work.power == 1 )
|
|||
|
|
{
|
|||
|
|
if( g_work.err_fault == NO_WARING )
|
|||
|
|
{
|
|||
|
|
g_work.m_time._Sleep_time = 0;
|
|||
|
|
|
|||
|
|
g_work.err_fault = BATT_HIG_ERR;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
g_work.m_work_flag.chargeflag = NOCHARGE;
|
|||
|
|
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
else if( ADCVolatge[0] > 1.240f ) // 50 33K
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
if( g_work.work_conditon == STANDY ) // 待机的情况下充电
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
|
|||
|
|
g_work.m_work_flag.chargeflag = CHARGE;
|
|||
|
|
}
|
|||
|
|
else
|
|||
|
|
{
|
|||
|
|
g_work.m_work_flag.chargeflag = NOCHARGE;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
if ( ADCVolatge[0] > 3.901f ) // 0 355K`
|
|||
|
|
{
|
|||
|
|
g_work.m_work_flag.zero_T_flag = 1;
|
|||
|
|
}
|
|||
|
|
else
|
|||
|
|
{
|
|||
|
|
g_work.m_work_flag.zero_T_flag = 0;
|
|||
|
|
}
|
|||
|
|
if( g_work.m_work_flag.chargeflag == CHARGE )
|
|||
|
|
{
|
|||
|
|
if( g_work.power == 1 )
|
|||
|
|
{
|
|||
|
|
Charge_ON();
|
|||
|
|
}
|
|||
|
|
else
|
|||
|
|
{
|
|||
|
|
Charge_OFF();
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
else
|
|||
|
|
{
|
|||
|
|
Charge_OFF();
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
//电量达到100%时 ，白灯长亮. 4.35
|
|||
|
|
//电量为70%-99%之间时，白灯常亮
|
|||
|
|
//电量为30%-69%之间时，蓝灯常亮
|
|||
|
|
//电量为1-29%之间时，红灯闪烁
|
|||
|
|
// 0: 白灯
|
|||
|
|
// 1：蓝灯
|
|||
|
|
// 2：红灯
|
|||
|
|
// 3：红灯闪
|
|||
|
|
void V_Conditon() // 电压判断
|
|||
|
|
{
|
|||
|
|
if(g_work._write_v_ok == 1)
|
|||
|
|
{
|
|||
|
|
//printf("\ng_work.m_conditon.m_conditon.V_conditon:%d\n",g_work.m_conditon.m_conditon.V_conditon);
|
|||
|
|
//printf("\ng_work.V_real_Value:%d\n",g_work.V_real_Value);
|
|||
|
|
//printf("\nOK!\n");
|
|||
|
|
switch( g_work.m_conditon.m_conditon.V_conditon )
|
|||
|
|
{
|
|||
|
|
case 0:
|
|||
|
|
if( g_work.V_real_Value <= 410) //99-70%
|
|||
|
|
{
|
|||
|
|
g_work.m_conditon.m_conditon.V_conditon = 1;
|
|||
|
|
Write_condtion();
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
break;
|
|||
|
|
case 1:
|
|||
|
|
if( g_work.V_real_Value <= 375 ) //30-70%
|
|||
|
|
{
|
|||
|
|
g_work.m_conditon.m_conditon.V_conditon = 2;
|
|||
|
|
Write_condtion();
|
|||
|
|
}
|
|||
|
|
break;
|
|||
|
|
case 2:
|
|||
|
|
if( g_work.V_real_Value <= 350 ) // <30%
|
|||
|
|
{
|
|||
|
|
g_work.m_conditon.m_conditon.V_conditon = 3;
|
|||
|
|
Write_condtion();
|
|||
|
|
}
|
|||
|
|
break;
|
|||
|
|
case 3: // 3.50
|
|||
|
|
|
|||
|
|
break;
|
|||
|
|
case 4:
|
|||
|
|
break;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if( g_work.power == 0 )
|
|||
|
|
{
|
|||
|
|
//printf("123\r\n");
|
|||
|
|
Write_condtion();
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
// }
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
/// @brief When DMA send data, set ADCflag, PA8, clear the interrupt flag,
|
|||
|
|
/// stop the conversion.
|
|||
|
|
/// @note If error occurs,Simulation to see if you can enter the interrupt
|
|||
|
|
/// function.
|
|||
|
|
/// @param None.
|
|||
|
|
/// @retval None.
|
|||
|
|
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
void DMA1_Channel1_IRQHandler(void)
|
|||
|
|
{
|
|||
|
|
//Stop Conversion
|
|||
|
|
ADC_SoftwareStartConvCmd(ADC1, DISABLE);
|
|||
|
|
//Clear interrupt flag
|
|||
|
|
DMA_ClearITPendingBit(DMA1_IT_TC1);
|
|||
|
|
ADC_DMACmd(ADC1,DISABLE);
|
|||
|
|
//Erected transmission complete flag
|
|||
|
|
ADCflag = 1;
|
|||
|
|
adc_get();
|
|||
|
|
g_work.get_r_flag = 0;
|
|||
|
|
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
//void get_adc
|
|||
|
|
|
|||
|
|
void adc_get()
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
static u16 chan, averagenumber = 0;
|
|||
|
|
if(ADCflag == 1)
|
|||
|
|
{
|
|||
|
|
ADCflag = 0;
|
|||
|
|
for(chan = 0; chan < ADCSCANNUM; chan++) {
|
|||
|
|
varADCavarage[averagenumber][chan] = ADCValue[chan];
|
|||
|
|
// printf("ADC_F chan %d cnt: %d __ %d ",chan,averagenumber,varADCavarage[averagenumber][chan]);
|
|||
|
|
// printf("ADC_%d __ %d ",chan,ADCValue[chan]);
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
//printf("\r\n");
|
|||
|
|
|
|||
|
|
WWDG_SetCounter(0x7e);
|
|||
|
|
//DELAY_Ms(2);
|
|||
|
|
ADC_SoftwareStartConvCmd(ADC1, ENABLE);
|
|||
|
|
ADC_DMACmd(ADC1,ENABLE);
|
|||
|
|
averagenumber++;
|
|||
|
|
if(averagenumber >= AVERAGELEN) {
|
|||
|
|
averagenumber = 0;
|
|||
|
|
ADCTrigFilterflag = 1;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
void ADC_work()
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
// if(ADCTrigFilterflag)
|
|||
|
|
// {
|
|||
|
|
// ADCFilter();
|
|||
|
|
// ADCTrigFilterflag = 0;
|
|||
|
|
// Get_ADCVolatge_new();
|
|||
|
|
// }
|
|||
|
|
// //adc_get();
|
|||
|
|
// //Determine whether the second-order filter is over
|
|||
|
|
// if(ADCTrigFilterflag) {
|
|||
|
|
// ADCFilter();
|
|||
|
|
// //Clear the filter end flag
|
|||
|
|
// ADCTrigFilterflag = 0;
|
|||
|
|
// //Convert the filtered value to voltage
|
|||
|
|
// Get_ADCVolatge();
|
|||
|
|
// g_work._write_v_ok = 1;
|
|||
|
|
// }
|
|||
|
|
//
|
|||
|
|
// //常温标定
|
|||
|
|
// if(g_work.temp_delay > 5)
|
|||
|
|
// {
|
|||
|
|
// ADC_SoftwareStartConvCmd(ADC1, ENABLE);
|
|||
|
|
// }
|
|||
|
|
//
|
|||
|
|
// if(g_work.get_r_flag == 1 && g_work.adc_count > 100)
|
|||
|
|
// {
|
|||
|
|
// ADC_SoftwareStartConvCmd(ADC1, ENABLE);
|
|||
|
|
// ADC_DMACmd(ADC1,ENABLE);
|
|||
|
|
// g_work.adc_count = 0; //定时采集
|
|||
|
|
// }
|
|||
|
|
// WWDG_SetCounter(0x7e);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/// @}
|
|||
|
|
|
|||
|
|
/// @}
|
|||
|
|
|
|||
|
|
/// @}
|